STP STP Brake Fluid Heavy Duty Dot 3
Product Information
Ingredients
No ingredients available.
Warnings
Warning: Cancer & reproductive harm. www.p65warnings.ca.gov.First Aid: Eye Contact: Immediately flush eyes with large amounts of water for 20 minutes. Get immediate medical attention. Skin Contact: Wash with soap and water. Ingestion: Do not induce vomiting. Immediately call a physician or Poison Control Center. Contains trimethylene glycol monobutyl ether, diethylene glycol and other glycols and glycol ethers.Warning: Harmful if swallowed. Eye irritant. See warning on back label. Caution: Do not refill container and do not use for other liquids. Danger: Keep out of reach of children and pets. Harmful if swallowed. Causes eye burns. Prevent contact with the eyes. Avoid skin contact. Wash hands after use. DO not ingest.
Details
Protects brake systems. For DOT3 ABS, disc and drum systems. Works with all brake systems requiring DOT3 fluids. STP Heavy Duty Brake Fluid DOT3 is scientifically engineered for optimum performance, for all ABS, disc or drum brake systems in today's cars and trucks to help: Provide protection against brake failure from vapor lock. Prevent corrosion in brake systems. Minimum wet boiling point 284 degrees F (140 degrees C). Works with all brake systems requiring DOT3 fluids. This is a DOT3 motor vehicle brake fluid. Questions? 1-888-G04-STP1 in the U.S.A. www.stp.com.
- Helps provide protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake system requiring DOT 3 fluids
- Exceeds federal motor vehicle safety standard No. 116
- Meets SAE spec. J1703.
STP Heavy Duty Brake Fluid DOT 3 is specially formulated to coax optimum performance out of disc or drum brake systems in today’s cars and trucks.
Directions
Directions: Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check fluid level once a month. To Bleed System: Refer to service manual. Do not reuse brake fluid from bleeding operation. Avoid spilling brake fluid on brake lining or car finish. Follow vehicle manufacturer's recommendations when adding brake fluid. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Store brake fluid only in its original container. Keep container clean and tightly closer to prevent absorption of moisture.
Country of Origin
Inc.,Made In USA For Energizer Auto,USA
Manufacturer
Energizer Auto, Inc.
Phone
888-G04-STP1
Product Disclaimer:
GIANT Food Stores is committed to providing accurate nutritional information to its customers. As an important part of that effort we voluntarily provide such material on our website. We rely upon our suppliers to provide us with this information on an ongoing basis and to advise us immediately whenever any new claims or adjustments to declared values are made, so that we can properly maintain the accuracy of this online resource. We have, however, experienced occasional situations in the past where, due to the lack of such notice or for some other reason, minor discrepancies in this area have occurred. We therefore strongly encourage our customers to read the labels of any of the products that they purchase in order to make certain that they are compatible with their own nutritional preferences and expectations. If you receive a product from GIANT Food Stores, and the nutritional information on the product label does not match the information on our site, please contact GIANT Food Stores customer service and we will arrange for a credit to issue for the product at issue.