12 oz btl
Harmful if swallowed. Eye irritant. Avoid eye and prolonged skin contact. Do not ingest. First aid: Eyes - Immediately flush with water for 15 minutes. Contact physician immediately. Skin - Wash with soap and water after use. If swallowed - immediately contact a physician or Poison Control Center. Keep out of reach of children. Note to physician: Contains diethylene glycol, Triethylene glycol monobutyl ether and polyalkylene glycol ethers. Caution: Never wash cylinders or parts with gasoline, kerosene or oil. Avoid spilling brake fluid on brake lining or car finish. Do not refill container and do not use for other liquids.
STP Heavy Duty Brake Fluid Dot3. Protects brake systems. For Dot3 ABS, disc and drum systems. Works with all brake systems requiring Dot3 fluids. 12 fl oz (354 ml). STP® Heavy Duty Brake Fluid Dot3 is scientifically engineered for optimum performance for all ABS, disc or drum brake systems in today's cars and trucks to help: Provide protection against brake failure from vapor lock. Prevent corrosion in brake systems. Exceeds federal motor vehicle safety standard No. 116. Meets SAE Spec. J1703. This is a Dot3 Motor vehicle brake fluid. Questions or comments? call 1-888-GO4-STP1. Visit www.stp.com. © 2016 The Armor All/STP Products Company.
Minimum wet boiling point 284°F (140°C). Clean all dirt from around cover on master cylinder before removing. Fill unit to level specified by manufacturer. Replace cover. Check Fluid level once a month. To bleed system: Refer to service manual. Do not reuse brake fluid from bleeding operation. Follow vehicle manufacturer's recommendations when adding brake fluid. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. Store brake fluid only it its original container,. Keep container clean and tightly closed to prevent absorption of moisture.
The Armor All/STP Products Company
Middleton, WI 53562