Gorilla Precision Glue Pen White

Gorilla Precision Glue Pen White

.75 oz pkg

Warnings

Note: Do not microwave or heat. Do not over apply glue. Be careful of squeeze-out. While curing, glue will expand 3-4 times. Store away from children and animals. Not recommended for use on polyethylene or polypropylene plastics. Eye & skin irritant. May produce allergic reaction by skin contact. Do not swallow. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Do not leave in hot vehicle. May cause sensitization by in inhalation and skin contact. Individuals with chronic asthmatic conditions should consult a physician prior to using product. May cause gastro-intenstinal blockage if swallowed. Contains diphenylmethane diisocyanate (MDI) mixed isomers, polymers and prepolymers. First Aid treatment: If swallowed, Call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water and gritty soap. If breathed in, move person into fresh air, For medical emergencies only, call 1-800-420-7186.

Details

Gorilla® Glue® Pen White. Incredibly strong. 100% Tough. Bonds virtually everything. Wood, stone, metal, ceramic, foam, glass & more! 2X Faster* dries white. 30 Min. Clamp it. 100% Water proof. For indoor & outdoor. Precision tip for small jobs or tight fits. 0.75 oz. (21.2 g). Damp it**: To activate Gorilla Glue. Glute it: Expands, use sparingly. Gorilla Glue is not an instant glue. *Works like Original Gorilla Glue, but dries 2x faster. **Lightly dampen surface. Do not add water to bottle. Bottled in USA. Conforms to ASTM D-4236. Call: 1-800-966-3458. Visit: www.gorillatough.com. ©2017 The Gorilla Glue Company.

All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. 1. Damp it! Lightly dampen one surface with water. 2. Glue it! Spread a thin layer of Gorilla Glue onto the other surface. 3. Clamp it!® Clamp for 30-60 minutes. Bond line improves with better clamping. Allow bond to cure for 24 hours. Cure time dependent on temperature and humidity. Clean-up: When wet glue off project immediately with dry cloth and/or paint thinner. Cured glue can be removed from work piece with chisel, scraper or sandpaper. See first aid section for removal from skin. Storage: After each use, wipe nozzle clean with a dry cloth. Squeeze all air from bottle. While still squeezing, tightly replace lid. Min. Coverage: 1/2 oz. per sq.ft. Open working time: Up to 5-10 minutes. Clamp: 30-60 minutes above 40°F. Best at room temperature. Cure time: 80% in 1 hour. Allow bond to cure for 24 hours. Full cure dependent on temperature and humidity. Moisture content: Best results from 10-25%. Below 10%, dampen surfaces with water.

Country of Origin

USA

Manufacturer

The Gorilla Glue Company

Address

2101 E. Kemper Rd. Cincinnati, OH 45241

Phone

1-800-966-3458